Geomechanical Properties of Aggregates of Some Basement Rocks of Akure, Southwestern Nigeria: Implications in Civil Engineering Construction Uses
- Authors
-
-
O. A. Akinfala
Department of Marine Geology, Nigeria Maritime University, Okerenkoko, Warri 332104, Delta State, Nigeria.
Author
-
O. A. Ademeso
Department of Applied Geology, Federal University of Technology, Akure, Ondo State, Nigeria.
Author
-
- Keywords:
- Array, Array, Array, Array, Array
- Abstract
-
This research characterized migmatite gneiss, porphyritic granite, and biotite gneiss from Akure using petrographic and geomechanical analyses. Petrographic analysis revealed distinct mineral compositions with the use of ImageJ software. Migmatite gneiss contained quartz (37.1%), microcline (33.9%), biotite (18.5%), and minor other minerals. Biotite gneiss comprised plagioclase (15.7%), quartz (37.4%), biotite (42.7%), and trace minerals. Porphyritic granite consisted of biotite (32.7%), quartz (31.3%), microcline (18.4%), plagioclase (14.6%), and accessory minerals. Porosity was similar across rock types (1.14%-1.36%). Dry densities ranged from 2.49 g/cm³ (migmatite gneiss) to 2.73 g/cm³ (porphyritic granite). Uniaxial compressive strength (UCS) values were 52.29 MPa (biotite gneiss), 56.70 MPa (porphyritic granite), and 55.10 MPa (migmatite gneiss). Aggregate impact value (AIV) and aggregate crushing value (ACV) ranged from 18.42% to 21.74% and 22.02% to 28.00%, respectively. Point load strengths were 5.06 MPa, 8.08 MPa, and 13.80 MPa, respectively. Rebound hardness and estimated UCS were 32-38 and 54-62 MPa, respectively. The study concluded that petrographic and physical properties significantly influence rock strength. High porosity and biotite content in biotite gneiss limit its use in heavy construction. Porphyritic granite, despite a texture typically associated with lower UCS, exhibited the highest strength, suggesting microstructural factors played a greater role in migmatite and biotite gneiss UCS than texture.
- Author Biographies
- References
-
Adekoya, J.A., Kehinde-Phillips, O.O., and Odukoya, A.M. (2003). Geological distribution of mineral resources in southwest Nigeria. In: prospects for investment in mineral resources of southwestern, Nigeria, Elueze, A.A. (Ed.). Elsevier, USA, p.1-13.
Ademeso, O.A and Adekoya, A.J. (2011). Relationship between petrography and uniaxial compressive strength of some crystalline basement complex rocks of some areas in southwestern Nigeria. British Journal of Science,vol. 2 (1), p.21-34.
Ademeso, O.A., Anifowose, A.Y.B., and Saliu, M.A. (2008). Reliability of Schmidt rebound hammer in estimating the uniaxial compressive strength of rocks. Science research Annals,vol. 4(2), p.47-60
Ademeso, O.A, Adekoya, J.A., Olaleye, B.M. (2012). Inter-relationship of bulk density and porosity of some crystalline basement complex rocks: A case study of some rock types in southwestern Nigeria.IOSR Journal of Engineering, vol. 2(4), p.555-567.
Ajibade, A. C (1988). Structural and Tectonic evolution of the Nigerian basement with special reference to NW Nigeria. Inter. Conf. on Proterozoic geology and tectonics of high-grade terrain (Ife, Nigeria) 45 p.
Akinola O.O., Ghani A.A., and James E. (2021): Petrography and geochemical characterization of a granite batholith in Idanre, southwestern Nigeria.SainsMalaysiana. Vol. 50(2), p.315-325
Anifowose, A.Y.B. (1989).The performance of some soils under stabilization in Ondo State, Nigeria. Bulletin of the International Association of Engineering Geology, vol. 40, p.79-83.
Anon. O (1981). Basic geotechnical description of rock masses. International Society of Rock Mechanics and Mining Sciences, and geomechanical abstracts. Vol.18, p.85-110.
American Society for Testing and Materials, (2001).Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method. ASTM Stand. 04.09(D 5873-00).
Ayday A. and Basu A. (2005). The Schmidt hammer in rock material characterization. Engineering Geology, vol. 81(1), p.1-14. http://doi.org/10.1016/j.enggeo.2005.06.006
Behrestaghi, M.H.N., Rao, K.S., and Ramamurthy, T. (1996). Engineering geological and geotechnical responses of schistose rocks from dam project areas in India. Engineering Geology, vol. 44 (1-4), p.183-201.
Bell, F.G. (2007): Engineering geology. Jordan Hill, Oxford, United Kingdom: Elsevier Ltd.
Blyth, F.G.H, and De-Freitas, M.H. (1984). A geology for engineers. 7th Ed. by Edward Arnold. Elsevier Ltd. 336p
British Standards Institution, (1990): BS 812-112: Methods for determination of aggregate impact value (AIV). BSI, London, p.812-112
British Standards Institution, (1992): BS 882, Specifications for aggregates from natural sources for concrete and roadstones. British Standard Institution, London. 882p
Cameron, I.B. (1972). Wearing coarse aggregates in Northern Ireland, Quarterly Journal of Engineering Geology, vol. 5, p.81-83. https://doi.org/10.1144/gsl.qjeg.1972.005.01.09.
Deere, D. U. and Miller, R. P. (1966). Engineering Classification and Index Properties for Intact Rock. Tech. Report. Air Force Weapons Lab., New Mexico, No. AFWL‐TR‐65‐116.
Ersoy, A. and Waller, M. D. (1995). Textural Characteristics of Rocks. Eng. Geol, vol. 39, p.123‐126.
Franklin, J.L and Broch, E. (1972). The point load test, International Journal Rock Mechanics and Mining Science, vol. 9, p.669–697.
International Society for Rock Mechanics (1981). Suggested methods for rock characterization testing and monitoring. ISRM Commission on Testing methods, E. T. Brown Edition. Pergamon Press Oxford, 211p
Jethro, M.A. Shehu, S.A. and Olaleye, B.M. (2014): The suitability of some selected granite deposits for aggregate stone production in road construction. International Journal of Engineering and Science, vol. 3(2), p.75-81.
Mahdi, T.K, Mohammed A. A, and Falah H. R. (2022). Experimental and Numerical Study on the Winged Pile-Soil Interaction under Lateral Loads.Published in IOP Conference Series: Earth and Environmental Science, vol. 961, p.012063
Ojo, J. S., and Adeyemi, G.O. (2003). Opportunities for ventures in construction materials. In A, A.Elueze (Ed), Prospects for investment in mineral resources of southwestern Nigeria (p.47-54)
Ojo, O., and Brook, N. (1990). Effect of moisture on some mechanical properties of rock. Mining Science and Technology, vol. 10, p.145–156.
Ojo, O. and Olaleye B. M. (2004). Classification of Ondo State Intact Rock for Engineering Purposes. Journal of Sci. Eng. and tech., vol. 11(3), p.5753 – 5759.
Olarewaju, V.O. (1981): Geochemistry of the charnockitic and granitic rocks of the basement complex around Ado-Ekiti – Akure, Southwestern Nigeria. University of London [unpublished Ph.D. thesis]
Olarewaju, V.O. (1987): Charnokitic granite association in southwestern Nigeria: rapakivi granite type and charnokiticplutonism in Nigeria. Journal of African Earth science, vol, 6(1), p.67-77.
Olarewaju, V.O. (1988). Petrology and geochemistry of the charnockitic and associated granitic rocks of Ado-Ekiti, Akure, Southwestern, Nigeria. Geological survey of Nigeria publication, Nigeria, p. 231-239.
Onodera, T.F and Kumara, H.M. (1980). Relationship between texture and mechanical properties of crystalline rocks. Bulletin of the international association of engineering geology, vol. 22, p.173–177.
Owoyemi, F.B.(1996). A geological-geophysical investigation of rain-induced erosional features in Akure Metropolis. Unpublished M.Sc. thesis, Federal University of Technology, Akure, p.11-18
Oyediran, I.A and Foghi, E.J. (2018). Petrography and strength properties of some southwestern Nigeria Precambrian Rocks. Journal Mining and Geology, vol. 54(2), p.87-98
Oyinloye, A. O. (2011). Geology and geotectonic setting of the basement complex rocks in southwestern Nigeria: Implications on provenance and evolution. In I. A. Dar (Ed.), Earth and Environmental Sciences (p. 98–117). Rijeka, Croatia: InTech.
Plumb, R.A., Herron, S.L., Schlumberger-Doll Research, Olsen, M.P., and Yale, U. (1992): Composition texture on compressive strength variations in the Travis Peak Formation. SPE Annual Technical Conference and Exhibition. 4-7 October, Washington, D.C.
Rahaman, M. A. (1976): Progressive Polyphase metamorphism of politic schist around Aiyetoro, Oyo State, Nigeria. Nig. Journ. Min. Geol. vol. 13(2), p.33 – 44.
Rahaman, M. A. (1981). Recent advances in the study of the Basement Complex of Nigeria. In The Precambrian Geology of Nigeria (Proceedings of the First Symposium on the Precambrian Geology of Nigeria, Geological Survey of Nigeria, October 14–17, 1981, Durbar Hotel, Kaduna) (pp. 11–43). Kaduna, Nigeria: Geological Survey of Nigeria.
Rahaman, M.A. (1988). Recent advances in the study of the basement complex of Nigeria. In: Precambrian. Geology. Nigeria,GSN Publication, p.11-43.
Rahaman, M.A., Emofurieta W.O., andCean-Vachette M. (1983). The potassic granite of Igbetti area. Further evidence of the polycyclic evolution of the Pan-African belt in Southwestern Nigeria. Journal of Precambrian Resources, vol. 22, p.75–92.
Sabatakakis, N., Koukis, G., and Tsiambaos, G. (2008). Index properties and strength variationcontrolled by microstructure for sedimentary rocks. Engineering Geology. vol. 97 (1-2), p.80-90.
Thuro, K., & Plinninger, R. J. (2001). Scale effects in rock strength properties. Part 2: Point load test and point load strength index. In Särkkä & Eloranta (Eds.), Rock mechanics – a challenge for society. Lisse: Swets & Zeitlinger, p.175-180
Yilmaz, I. and Sendir, H. (2002). Correlation of Schmidt hardness with unconfined compressive strength and Young’s modulus in gypsum from Sivas (Turkey). Engineering Geology, vol. 66(3-4), p.211-219. https;//doi.org/10.1016/S0013-7952 (02)00041
- Downloads
- Published
- 2025-12-31
- Section
- Articles