Geological and Rheological Properties of Ugieghudu Clays, Southern Nigeria

Authors
  • O. A. Bamisaiye

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Author

  • S. O. Daramola

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Author

  • I. T. Asowata

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Author

  • A. L. Adisa

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Author

  • S. K. Abeiya

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Author

  • O. O. Shonde

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Author

Keywords:
Array, Array, Array, Array, Array, Array
Abstract

The demand for locally sourced drilling mud materials in Nigeria has intensified due to the high cost of imported bentonite. This study appraises the geological, geotechnical, mineralogical, rheological, and filtration properties of clay deposits from Ugieghudu, southwestern Nigeria, to evaluate their suitability for drilling mud applications. X-ray diffraction (XRD) results indicate that the clays are predominantly composed of kaolinite (20–60%) and quartz (20–60%), with minor amounts of vermiculite, orthoclase, muscovite, and iron oxides. Particle size analysis revealed clay contents ranging from 28% to 77%, with liquid limits of 42–80% and plasticity indices of 24–45%, consistent with moderate to high plasticity materials. Specific gravity values range from 2.62 to 2.68, while activity indices classify the clays as inactive to normal, reflecting limited swelling compared to bentonite. Rheological evaluation across temperatures of 30–90 °C showed gel strengths between 4–10 lb/100 ft², plastic viscosities of 2–8 cP, and yield points of 2–8 lb/100 ft², with YP/PV ratios generally within API-recommended limits. Apparent viscosities remained thermally stable, indicating adequate carrying capacity under varying wellbore conditions. Filtration tests produced filter cake thicknesses of 0.4–0.5 cm, mud densities of 8.5–8.65 lb/gal, and alkaline pH values (8.6–8.9), all within acceptable ranges for drilling fluid performance. The integration of mineralogical, index, rheological, and filtration properties suggests that Ugieghudu clays possess baseline characteristics for drilling mud formulations, although their relatively low swelling capacity compared to the Wycombe bentonite implies the need for beneficiation or chemical modification. The findings highlight the potential of these clays as a cost-effective local substitute for imported drilling mud materials, with implications for reducing drilling costs and enhancing resource sustainability in Nigeria’s oil and gas sector.

Author Biographies
  1. O. A. Bamisaiye, Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

  2. S. O. Daramola, Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

  3. I. T. Asowata, Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

  4. A. L. Adisa, Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

  5. S. K. Abeiya, Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

  6. O. O. Shonde, Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

    Department of Applied Geology, The Federal University of Technology, Akure, Nigeria.

References

Afolabi, O., Inegbenebor, A. and Akinwumi, I. I. (2017). Nigerian bentonite: Performance evaluation for drilling fluid formulations. Journal of Petroleum Exploration and Production Technology, vol. 7(2), p.387–397.

Aigbedion, I. and Iyayi, S. E. (2007). Formation evaluation problems in Nigeria: A case study of the Niger Delta. Journal of Applied Sciences Research, vol. 3(12), p.2091–20.

Akinyemi, S. A., Ijalana, S. A., and Akinwumi, I. I. (2016). Characterization of some Nigerian clays as drilling mud. Applied Clay Science, vol. 132–133, p.130–138.

Amadi, A. A., Onyelowe, K. C., and Igwe, O. (2019). Drilling fluid enhancement using Nigerian local clays. Geotechnical and Geological Engineering, vol. 37(6), p.5575–5585.

Anyanwu, N.P.C., and Arua,I. (1990).Ichnofossils from the Imo Formation and their palaeoenvironmental significance. Journal of Mining and Geology, vol. 26, p.1–4.

API. (2010). Specification for drilling fluid materials (API Specification 13A). American Petroleum Institute, 128p. Available at https://celluloseether.com/wp-content/uploads/2018/04/API-SPEC-13A-2010.pdf

Apugo-Nwosu T. U., Mohammed-Dabo I. A., Ahmed A. S., Abubakar G., Alkali A. S., Ayilara S.I., (2011). Studies on the suitability of Ubakala bentonitic clay for oil well drilling mud formulation. Br J Appl Sci Technol, vol. 1(4), p.152–171

ASTM International. (2018). Standard test methods for liquid limit, plastic limit, and plasticity index of soils (ASTM D4318-17e1). Retrieved from https://doi.org/10.1520/D4318-17E01

ASTM C114. (2022). Standard Test Methods for Chemical Analysis of Hydraulic Cement , Special Publications. Retrieved from https://store.astm.org/c0114-18.html

Bello, O. S., Olatunde, A. O., and Afolabi, R. O. (2015). Performance evaluation of local clays from Nigeria with imported bentonite as drilling mud. International Journal of Scientific and Engineering Research, vol. 6(3), p.50–57

Bourgoyne, A. T., Millheim, K. K., Chenevert, M. E., and Young, F. S. (1991). Applied Drilling Engineering. SPE Textbook Series, 508p.

Tricker R. (1991). The British Standards Institution. Defence Electronics, (1991), p.15-37 https://doi.org/10.1016/B978-0-7506-0095-8.50007-2

Caenn, R., and Chillingar, G. V. (1996). Drilling fluids: State of the art. Journal of Petroleum Science and Engineering, vol. 14(3–4), p.221–230. https://doi.org/10.1016/0920-4105(95)00051-8

Caenn, R., Darley, H. C. H., and Gray, G. R. (2017). Composition and properties of drilling and completion fluids, (7th ed.). Gulf Professional Publishing, Elsevier. 748p https://doi.org/10.1016/C2009-0-64504-9

Ehirim, C. N. and Akpokodje, E. G. (2012). Local bentonite deposits as drilling mud in Nigeria: Potentials and challenges. Nigerian Journal of Applied Science, vol. 30(2), p.134–142.

Ettehadi Ali , Ceylan Ülker and Gürşat Altun (2022): Nonlinear viscoelastic rheological behavior of bentonite and sepiolite drilling fluids under large amplitude oscillatory shear. Journal of Petroleum Science and Engineering, vol. 208, p.109210, Part B https://doi.org/10.1016/j.petrol.2021.109210

Nwajide, C. S. (2013). Geology of Nigeria’s Sedimentary Basins. CSS Bookshops Limited, Lagos. 565p.

Nwajide C.S. and Reijers T..J..A. (1996). Geology of the southern Anambra Basin. In selected chapters on Geology, Reijers, T. J. A. (ed.). SPDC Corporate Reprographic Services, Warri, Nigeria, p.215-270

Olatunde, A. O., Olafadehan, O. A., and Sulaimon, O. A. (2012). Rheological properties of drilling mud formulated from locally beneficiated Nigerian bentonite clay. Journal of Petroleum Exploration and Production Technology, vol. 2(3), p.179–185. https://doi.org/10.1007/s13202-012-0020-9

Omole, O., Falode, O. A., and Malomo, S. (2013). The suitability of Nigerian bentonitic clay as drilling mud. Journal of Petroleum and Gas Exploration Research, vol. 3(5), p.85–93.

Onyemaobi, O. O., and Ogbonna, N. C. (2014). The rheological properties of drilling mud using local clays from South Eastern Nigeria. Nigerian Journal of Technology, vol. 33(1), p.24– 31.

Osasan, S. K., and Afere, A. (2010). Evaluation of some Nigerian clays for their use in drilling mud. Journal of Engineering and Applied Sciences, vol. 5(1), p.1–4.

Shan Yi , Zhirong Lu, Jie Cui, Wei Li, Yadong Li, Weixiang Sun (2024). Rheological study of the effect of clay mineral composition on non-linear viscoelasticity. Journal of Applied Clay Science, vol. 249, p.107229 https://doi.org/10.1016/j.clay.2023.107229

Shepherd, T.G. (2010). Visual soil assessment, Pastures Part 1. Food and Agricultural Organisation, p3. http://www.fao.org/docrep/010/i0007e/i0007e00.htm

Vahid Reza Ouhadi and Mohammad Goli(2025). Impact of organic contaminant viscosity and cation hydrated radius on the rheological properties of sodium-bentonite: experimental and numerical investigations. Journal of Environmental Monitoring and Assessment, vol. !97, p.68. https://link.springer.com/article/10.1007/s10661-024-13560-8

Wei Xin, Junchao Li, Zhonghao Sun, and Ling Xu. (2025). Study on the steady-state and dynamic rheological characteristics of five clayey materials. Journal of Construction and Building Materials, vol. 458, p.139583. https://doi.org/10.1016/j.conbuildmat.2024.139583

Downloads
Published
2025-12-31
Section
Articles